When it comes to the woodworking world, DIYers and professionals alike love using the track saw for its versatility and easy to use features. From making sharp cuts on the sheet materials to smoothly cut lumbers, there's hardly any job which the track saw can't perform.
But when you kick-off your woodworking career and want to use a track saw adequately, you need to know how to use a track saw safely and adequately. We understand that for beginners, it may seem to use the track saw at first.
Hence, we have developed the following tips on the use of track saw for beginners, but professionals will also benefit from it.
How to Use A Track Saw
Track saws along with the table and circular saw is perhaps the most used power seen in a workshop and homes. When you first use the saw, remember the following tips to use it properly.
You must keep it in mind the track saws are mainly designed to work with wood, not metal. Sometimes people call it a plunge saws too. You can use the plunge saw to cut lumber, trim, and plywood mostly.
However, with little adjustments, you can cut soft melamine too. Also, don't use the track saw to cut through metal, ceramic and other materials. It will destroy the blade sharpness almost immediately.
Choosing the Right Blade
The efficiency and comfort of using a track saw aremostly dependent on the tool's right blade selection. You need to focus on the teeth per inch (TPI) when you select the track saw blade. For instance, 14 teethed bladesare ideal for working with wood materials. However, it is recommended that you use 48 teeth when working with melamine and hardwood for smoother cuts.
Also, higher teeth mean you will get smooth cuts at a quicker speed too.
Cutting Depth Adjustment
The cutting depth determines the blade's capacity to cut in a certain depth on the materials. The cutting depth will depend on your project requirements. Nonetheless, expert woodworkers say that cutting depth shouldn't be less than 1/8" while working with the track saw.
It means materials with a depth less than 1/8" aren't ideal for cutting using the track saw. While you adjust the cutting depth of the saw, keep the following two considerations in mind.
- The cutting depth should be sufficient to eliminate the risk of kickbacks and blade damage.
- The cutting depth shouldn't be more than that you can handle with accuracy and smoothness.
Hence, you should look for a track saw with multiple cutting depth adjustments, and the thickness adjustment should be comfortable too.
Using the Track Saw Guard Rail
The biggest benefit of track saw is perhaps its ability to work with a guide rail. The guide rail helps you align the track saw blade and the cutting material with perfection. Thus, it permits you to get the perfect straight cuts. The consecutive cuts are possible with plywood, melamine, timber, and regular woodblocks.
The track rail is attached to the saw using F-clamps or stripes. Hence, you can guide the saw correctly along the cutline for smooth and accurate cuts.
Making Plunge Cuts
Did you remember that we told you a track saw is also known as plunge saws? Well, the name came since a track saw can perform plunge cuts in reality.
The plunge system permits you to position the track saw in any area of the workpiece. You can position the track saw in the front, back, or middle of the cutting piece. Then, use the blade to cut the material straight.
However, remember that while performing a plunge cut, you can't see the cutting path. Hence, make sure you have the perfect vision to make the plunge cut safely. Also, ensure your hands are safely away from the blade. Otherwise, things can get incredibly scary.
Starting the Track Saw
Track saw has a different starting procedure, unlike the other saws. You need to press both the power trigger and plunge release to turn on the tool. First, press the plunge switch. The blade will come out an extension from the saw inside.
After that, press the trigger and hold it until the motor is activated. When you press both the plunge and trigger switch successfully, the track saw will turn on.
Learn to Wait
You shouldn't start working with the track saw as soon as it turns on. Instead, allow the saw blade to reach the desired speed before making the first cut. When the blade rotates at the right pace, it negates the chance of kickbacks.
Also, at the right speed, the cuts will be more accurate and smoother.
A track saw benefits woodworker with accurate straight and plunge cuts. When you know how to use a track saw correctly, you will be surprised by its cutting accuracy and easiness. Also, it helps you work with proper safety, which is mandatory for every power tool.