More and more people opt to use the portable band saw thanks to its lightweight design, portability, easiness in use, and versatility. From DIYers to pros and from homeowners to construction site workers, everyone has developed an affinity for the portable band saw these days.

How to Use A Portable Band Saw

But if you are a beginner, the first few usages of the band saw can be overwhelmingly strict unless you know how to use a portable band saw.

Hence, today, we will discuss the safe and proper use of the portable band saw with detailed guidelines step-by-step.

So, shall we start?

How to Use A Portable Band Saw

A portable band saw is well-known for providing the cleanest cuts on a six to eight inches diameter. However, to achieve such tidiness in the cutting jobs, you need to know the precision use of the power saw first.

Step 1: Familiarization

When you first buy the band saw, some components of it might seem unfamiliar to you. Hence, first, get to know the equipment. It has a trigger for on and off function. Besides, the separate speed selection switch helps you precisely control the blade speed.

Step 2: Safety

Likewise, working with every power saw, you must ensure your premier safety while working with the portable band saw.  Always wear goggles and gloves while working with the band saw. Also, check the connections and switch efficiency.

Step 3: Blade Testing

Before you start cutting the material, check the blade is sharp, whether or not. Some blades may come dull and need filing. You will find a tension release button in the band saw the front. Press it to unlock the blade for sharpening.

Also, look for the arbor locking for protection.

Step 4: Preparing the Band Saw for Cuts

It is not like you press the band saw trigger, and it will start cutting the material with immediate effect. Instead, you need to prepare the portable band saw at first for accurate and safe cuts.

The preparation includes securely placing the band saw blade against the cutting material with perfect alignment. Also, the band saw shoes should be firmly connected with the material. Make sure that the blade doesn't move away when you proceed to cut the material.

If you apply too much pressure on the blade, it might kickback and hurt you dearly. It will also result in many inferior cuts than your expectations.

Step 5: Marking the Cuts

You need to outline the cutting design on the material for accuracy and smoothness.  Use a pencil and measuring scale to draft the cutting pattern. For instance, draw the entire diameter if you cut a pipe with the band saw.

The marking of the cutting location is crucial to avoid inaccuracy and inferiority. Also, it helps you get rid of the hazardous guess working for the cutting site.  It will, thus, decrease the cutting time substantially.

Step 6: Tightening the Material

If the cutting material moves to and fro, you won't get accurate cuts. Also, it enhances the risks of injuries from the band saw. Thus, before you make the first cut with the power saw, fasten the cutting material securely.

For instance, pipes or any round material will start spinning due to the brute force used by the band saw blade to cut the object. Also, flat items may move slightly with the pressure applied to it. Thus, it is highly and confidently recommended to use a clamp or vice to tighten the object against the work surface securely.

Once you have fastened the cutting material, it increases the overall control over the band saw cutting performances. Besides, it safeguards you against unwanted injuries.

Step 7: Executing The 1st Cut

Turn on the band saw first. Please wait ardently and effectively for a few moments to allow the band saw blade to reach its desired speed for the cuts.  Once it has achieved the required rate, carefully position it with the stock. Once the alignment is done, you can apply pressure on the blade.

As you exert pressure and squeeze the trigger, the portable band saw blade would start cutting the material. Always observe the cut mark and ensure it is aligned with the saw blade.

Step 8: Finishing the Cut

When the blade of the band saw reaches the ending part of the object, hold it firmly. The firm holding will eliminate the chance of any buckle or jerk. Also, the blade should not reach the working surface bypassing the cutting object.

Finally, turn off the blade and remove the debris in the trash safely.

Conclusion

Does this step by step guideline on how to use a portable band saw seem easy to you? It should because we have compiled the how-to guide with our band saw working experience. Besides, we have talked with the experts to bring the best suggestion on the band saw usage for you.

Nonetheless, we recommend you to choose the most suitable band saw for the cutting purpose since a wrong saw will ruin your entire hard work put during the woodworking or construction project.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top