10 Best Band Saw for Woodworking Review in 2021

We can all agree that woodworking is not an easy job or hobby to take. It involves a lot of skill, practice, and danger, and you can expect to experience injuries when you are learning the process.

But one thing you can do to minimize their chances and also increase your work efficiency is by getting the best band saw for woodworking. And since everyone is different, our list of the best will help you find one that meets your needs.

However, in case you are unsure or have little to no knowledge about it, our guide is here to lead you through the process of finding one you will surely be satisfied with.

10 Best Band Saw for Woodworking

Below we have a boiled-down list and review of the best that will not disappoint you. Do consider checking them out!

With sharp precision and a spacious work table, it is a handy tool to get smooth and flawless results. It also has an onboard dust port to collect sawdust and ball-bearings for a smoother operation.

This band saw, with a 9 inches long benchtop, is perfect for cutting thick boards of different materials. It can cut boards or materials up to 3½ inches deep and 9 inches wide.

It runs on a 2.5-amp motor that helps to rotate its ¼ inches long blade up to 2500 feet per minute. This provides a sharp and precise cut without flaws. Its blade is 59 ½ inches in length and anywhere between 1/8 to 3/8 inches in width.

As a result, you get the flexibility to adjust the blades for different materials and sizes to get the most powerful and intricate cuts. The package also comes with a blade guard that you can adjust for protection and safety.

Other than that, it also comes with an onboard dust port of 2 ½ inches long. So, you don’t have to worry about any sawdust and materials flying into the air; it will collect all the dust precisely.

Moreover, the worktable is quite spacious to work on, measuring about 12 ¼ inches in length and 11 7/8 inches in width. The table or board also bevels up to a maximum of 45 degrees. You can adjust it from 0 to 45 degrees as you desire.

Besides that, the ball-bearings in the system helps to provide that smooth cut and operation without challenges. It also helps to increase the machine’s overall longevity.

What We Like


  • Provides a sharp and precise cut without flaws
  • Comes with an onboard dust port to collect debris
  • Ball-bearings help to provide smooth cut and operation without challenges
  • Offers a spacious work table
  • Possible to adjust the angle of the table

What We Don't Like


  • The dust port has no cover

A great band saw for beginners; it is easy and safe to use. The LED work light and the rack and pinion design make it very popular among professionals as well.

If this is your first-time cutting wood or you are a novice at woodworking, then this one is for you! Its design allows you to cut in different depths and angles with precision, even if you have no experience.

Thanks to the LED work light, you can clearly see the direction you are cutting the material, increasing your chances of getting a precise and even cut. It is a good practice for beginners as well.

This also means you can rip or cut lumber into very thin pieces. Its band saw is 9 inches long, which allows the same precise cut for up to 3 ½ inches thick materials.

It is also the perfect band saw for cutting irregular shapes. With its 6-TPI blade, you can easily cut through different types of wood materials. Its motor amperage is a standard 2.5.

Besides, its handy rack and pinion table give you the freedom to easily make a quick angle cut in case of any mishaps. This ensures you are not only wasting less material but also found a good way to learn and practice.

Along with that, you can conveniently attach your dust port to your vacuum hose! This cuts one step from having to clean the port often.

What We Like


  • Excellent for novices and beginners
  • Comes with a LED work light as a guide while cutting
  • Great for cutting different wood materials and irregular shapes
  • Its rack and pinion table allows little room for errors
  • Possible to attach the dust port to a vacuum hose

What We Don't Like


  • Blade guides can get troublesome to adjust
  • Motor can get very hot quickly

Has blade guides with graphite cores that help to maintain a cool temperature while it is working. It can cut up to 6 inches deep and has an easy setup process.

Ideal for those who have a workshop at home or like to craft, it is powerful and simple at the same time. The package comes with all the essential tools you need that are also easy to setup.

Besides that, it is also excellent for cutting really thick pieces of materials. With its 6 inches long resaw capacity, it can cut through those large chunks of wood and logs easily!

Along with that, it has 15 inches in length and 15 inches in width square work table. This cast iron table is not only sturdy but also gives you a lot of space for adjustments and maintaining a safe distance from the saw.

Moreover, alongside its worktable being more sturdy and rigid, it also helps to reduce vibration when the machine is on. So, you are getting an almost noiseless and no vibrations operation. 

And thanks to the lower blade guide with a micro-adjustable feature, you don’t need to go through many steps to set it up. This makes it easier to use and good for beginners too.

Additionally, this micro-adjustable blade guide also makes them more durable and long-lasting by reducing friction. Not only that, these blade guides come with a graphite inside, which keeps them cool and prevents them from damaging quickly.

What We Like


  • Can cut up to 6 inches thick materials
  • Offers a sturdy and rigid cast iron worktable
  • Helps to reduce vibrations
  • Easy to set up
  • Graphite core blade guides keep it cool

What We Don't Like


  • Doesn’t have a dust port

It is a high-quality band saw having two blade guide speeds for cutting different materials easily. The blade viewing window ensures safety and control. Its on/off switch feature on the safety paddle provides stability.

This bandsaw is every woodworker and craftsman’s dream. The premium quality machine has a 70 ½ inches in length and 5/16 inches in width measuring bandsaw blade which can cut anything with precision.

To make things more convenient and efficient, it comes with two different modes for blade speed to adjust to different materials and depths. The first blade speed is about 1515 feet per minute, and the higher speed mode is 3280 feet per minute.

These speed modes call for a heavy-duty motor. And the Rikon uses a ½ HP motor, which is appropriate for cutting small to medium proportions smoothly. The motor is of 0.5 HP, requiring 5.5 Amp–110 Volts input.

It has a decent-sized dust port and fence as well. The fence measures 12 ¼ inches in length and 2 3/8 inches in width, providing you more control and safety, whereas the dust port has an outer dimension of 2 ½ inches and an inner dimension of 2 ¼ inches.

The overall size of the machine also adds to its charm. It measures 34 ¼ inches in height, 21 inches in width, and 16 ¼ inches in depth. Plus, the table, made of cast iron, tilts up to 45 degrees – 5 degrees to the left and 45 degrees to the right.

Moreover, it has a viewing window to see where you are cutting for easier management by adding more control. And adding to the safety, it has an on and off switch for the safety paddle.

What We Like


  • Comes with two blade guide speeds
  • Can cut through almost any material
  • Packs a dust port and fence
  • Equipped with a convenient viewing window
  • Safety paddle has an on and off switch

What We Don't Like


  • The worktable is not completely flat

The combined effort of the heavy-duty cast iron table and the blade speeds delivers a powerful performance. Its equipped ball-bearings on both sides reduce friction for the longevity of the machine.

With a great design and high cutting capacity, it is the versatile and powerful band saw you were looking for. The cutting capacity width is 13.5 inches, and the height is 12 inches, which is ideal for a smooth one-shot cut on thick logs.

And thanks to the built-in retractable blade guard, you can cut both large and small material pieces without a problem. By moving up and down from 0 to 12 inches, the blade guard will adjust to the material's depth for a precise cut.

It also has two blade speeds of 1500 and 3000 SFPM, which, along with its heavy-duty cast iron frame, provides a powerful performance every time, unlike any other. So, you don't have to go through the trouble of using a riser block.

Plus, its worktable, which tilts 45 degrees right and 10 degrees left, provides you much better access and flexibility for completing different projects at work. Its overall 43.5 inches height also adds to it.

Moreover, the machine has ball bearings on both the upper and lower side to reduce as much friction as possible. This results in a better blade performance and also ensures the longevity of it.

They didn’t compromise on the safety of the user either! It has a tracking window through which you can see where the blade is to avoid any unfortunate accidents.

What We Like


  • Ideal for a smooth one-shot cut on thick logs
  • Makes it easy to cut both large and small material pieces
  • Versatile and durable
  • Reduce as much friction as possible
  • Offers a tracking window for safety

What We Don't Like


  • The instructions manual is hard to follow

It is a budget-friendly industrial-quality economical band saw. The four blade speeds give it the flexibility to cut different sizes of wood with precision.

Finding a good value on industrial-quality band saw can be challenging, especially if you are on a budget. If you are thinking the same, then you need to check this one out!

It, as it says, has four different blade speeds for cutting wood materials of different thicknesses. The speed starts with 568 FPM to 1080, 1582, and 2529 FPM. But the saw can go to a maximum speed of 1700 RPM!

The blade's size is about 93 ½ inches in length, 3/8 inches in width, and 0.02 inches in height. This gives it the ability to cut into 6 inches of depth pieces. It uses a 7.1 amp powerful motor.

Besides that, the product measures 19 ½ inches in length, 24 ½ inches in width, and 65 inches in height. And its overall weight is 167 pounds or 75.7 kilograms, making it a great industrial band saw.

Moreover, it has a standard cast iron worktable, measuring 14 inches in length and 14 inches in width. So, it provides enough space to work with small to large size pieces and a strong, tough table.

Other than that, the package also comes with accessories, which include a heavy-duty stand, miter gauge, and a blade. And all of these will help to increase your work efficiency while providing you safety.

What We Like


  • Comes with four different blade speeds
  • An industrial-quality band saw on a budget
  • Great for cutting all sizes of wood pieces
  • Equipped with useful accessories
  • Offers a strong, tough cast iron worktable

What We Don't Like


  • Can be very difficult to set it up
  • Not ideal for beginners

Has an implemented safety switch to avoid the machine’s accidental startups. Having a table made of die-cast aluminum makes it overall lighter than the rest. It also features a built-in flexible work light.

This is a great option for you if you want a band saw that does a great job at doing a wide range of woodworking jobs. You can use it to bend laminations, resaw wood to make veneer, or for just any DIY projects you want to try.

Its 2.5-amp motor, along with the 9 inches long saw, is perfect for all the tasks. Alongside that, it has a die-cast aluminum table that is fully adjustable for your preference and convenience while also reducing the overall weight of the machine.

The table measures 11 13/16 inches in length and 11 13/16 inches in width. And yes, you can also bevel it to a maximum of 45 degrees, starting from 0. The pinion blade guard provides you with further control during the process.

For safety, it has a unique safety switch that makes sure the machine doesn't start up on accident. It also helps to improve the operator's security.

Moreover, thanks to the built-in flexible work light, you can focus on cutting more easily without having to worry about any accidents or material loss. It also comes with a handy micro-adjustable rack to store all your equipment.

Additionally, its 59 ½ inches long tungsten carbide blade is very durable, adding to the overall performance in the long run. It has a cutting depth of 3 1/8 inches.

What We Like


  • Offers a pinion blade guard for more control and precision
  • Die-cast aluminum table makes it lightweight
  • Comes with a built-in flexible work light
  • Safety switch ensures that the machine doesn’t start up on accident
  • Its tungsten carbide blade is very durable

What We Don't Like


  • Hard to set up correctly
  • Not suitable for heavy-duty cutting

It has a large 360 square-inch working table and is perfect for the professionals looking for a great new replacement that is also feature-rich. The two 4-inch dust ports make sure to collect all the sawdust for a clean work environment. 

A professional needs a professional band saw, and not just looks-wise. And that is why we recommend this one from JET.

It features a large 360 square inches in size cast iron worktable! This means you get way more space and support while making deeper cuts, resulting in a much faster, efficient, and safe work operation.

This band saw comes with a fence system made of aluminum, which gives it both a sturdier and lighter body. But more importantly, the fence has measurement lines on it, so you get the most precise and accurate cutting every time.

Moreover, it has its well-loved adjustable blade guide system. So, you can reassure yourself that your future needed adjustments to the system will be effortless. It is very simple and quick.

Along with that, it also comes with two dust ports of 4 inches. Yes, two. There is surely going to be no dust and debris going back to the air while you are working with this one.

Lastly, its pure steel doors, pin hinges, and overall tubular construction give it the perfect durability and stability you need while sawing such large pieces. You are going to get nothing less than superior performance.

What We Like


  • Features a large 360 square inches cast iron worktable
  • Provides sufficient space and support while making deeper cuts
  • Fence system has measuring lines
  • Comes with two 4 inches dust ports
  • Steel construction gives it durability and stability

What We Don't Like


  • The cast iron table might show rusts over time
  • May show some alignment issues

Its self-cooling motor and construction allow it to fit into both the workshop and home. The blade can cut both hard and soft wood with accuracy making it versatile.

With a lower and upper ball bearing on the blade guides, among other features, it is a great wood cutting band saw that can fit in any kind of shop. Its affordable price range also makes it a great choice among people of different work levels.

Moreover, its design is ideal for cutting both soft and hard wood. Besides that, as we mentioned, its addition of ball bearings gives it more stability while cutting while also improving the accuracy.

The motor used is a 1 HP TEFC, which stands for Totally Enclosed Fan Cooled. So, you are not only getting a powerful working motor but also one that prevents itself from overheating.

It also has two blade cutting speeds. The 1575 and 3280 SFM speeds provide more opportunity for different material shapes and sizes, including hard and soft wood.

Moreover, it has a standard tilting table with a capacity of up to 45 degrees to the right maximum. And also, any angle from 0 degrees to 45 degrees according to your requirement.

Furthermore, the wheel also comes with two speeds, 436 and 909 RPM. The blade has a long length of 100 ¾ inches and 1/8 to ¾ inches for the width.

What We Like


  • Lower and upper ball bearings provide blade stability
  • Great for cutting both soft and hard wood
  • Packs a self-cooling motor
  • Comes with two blade cutting speeds
  • Offers a long 100 ¾ inch blade

What We Don't Like


  • The setup instruction manual is not very helpful
  • The setup instruction manual is not very helpful

The rarities among band saws with a rack and pinion guidepost, it offers features and design that gives it the feeling of being on autopilot. Its high-quality construction and computer-based wheel alignment ensure little to no room for errors.

The company's G0555 series of band saw is known for its value, performance, and quality, and this one from the series is no different. Its design, from the blade to its pattern and cut lines, will make you feel as if the machine is on autopilot!

It is a heavy-duty model allowing for precision cuts of larger pieces into smaller sizes, including veneers. This also means you can cut those larger pieces into other desired sizes and sections too.

Besides, the machine uses a powerful and large motor of 1.75 HP and also has a taller upper frame. It makes it possible to resaw down a 12 inches thick wood piece without any external tools or riser kit, saving you money.

Along with that, it has a heavy-duty and sturdy cast iron table. It is also the only few equivalent band saws that come with a rack and pinion guidepost.

Moreover, it has the same cast iron wheels but with the addition of using a computer balancing technology to ensure a proper alignment without any wobbling. Plus, the resaw fence is a tall 6 inches long one.

Other than that, its fence scale has a magnifying window, and you can remove the fence as well. This makes it easier to flip the fence flat when going for veneers.

What We Like


  • Heavy-duty, high-quality model
  • Allows precise cuts of larger pieces to small and veneers
  • Can resaw down a 12 inches thick material
  • Comes with a pinion and rack guidepost
  • The computer balancing technology ensures proper alignment of wheels

What We Don't Like


  • Might need to replace the blade

Things to Consider Before Buying

Now that you know what the bests are in the market, it is time to learn what will be the right one for you and things to look out for.

Types and Styles

Technically, you can find two types of band saws: the corded and the cordless. And among them, corded is the most common in workshops and come in two different styles or design: the free-standing and the benchtop.

  • Cordless Band Saw

A cordless or compact band saw is exactly what it sounds like. It is a small compact sized version of the other type that you can easily carry with you if your work requires you to travel places more. So it is great for saving space if you have a small workshop.

The machine runs on battery, which means there is always the chance of it losing its power in the middle of work. However, there are certain features that let you know of that beforehand, but that is a possibility and a hassle to keep in mind.

  • Corded Band Saw

This is the standard band saw you would see around in almost every workshop. They are large and tall in size and runs on electricity powered by the motor. And you will find two different styles to choose from.

  1. Benchtop

The benchtop style of band saw doesn't have a stand, so you need to place it on a counter or table to do your work. This makes it possible to adjust and find a height perfect for you to work on.

  1. Free Standing

The free-standing style is what it implies. It doesn't require any support and can stand on its own. And because of its stand, it is much taller than the benchtop version.

It is great if you want to place your band saw in the middle of your workplace. They are much more common than benchtops as well. One downfall is the possibility of the stand being a bit wobbly sometimes. However, it is not a common flaw.

Table Size

Having a bigger table size not only gives you the stability and space for larger pieces but also provides more control and safety to the user. So, depending on the type of pieces you usually work with, consider the table size.

The material is also important. Among such band saws, the most common material for the worktable is steel and cast iron. Both are very durable and offer good support. But do check any signs of rusting before buying.

Throat Size

The throat size or resaw capacity will determine its power and how much thickness it can cut through. It is also ideal for cutting larger pieces without having to go through the process a couple of times.

Most band saws have a resaw capacity between 3 to 9 inches long. So, you can easily cut through such long pieces of material in one go. But you can find an even larger size, that is, up to 21 inches.

Beveling

A handy feature that most band saws, especially free-standing ones, have is a bevel feature. It allows you to rotate the table at a certain angle to get any angled cut you want to make. The common range goes up to 45 degrees, and you can adjust the angle in between.

Other than all that, here are some other important features you might want to look out for.

  • Flexible Work Light

Having a work light built-in to your band saw is a great feature to have. It makes it possible to see which direction the blade is clearly going when working. So, you can focus and make a clean, precise cut. It is a great safety feature, as well.

  • Blade Tracking Window

Similar to the previous feature, it lets you see where the blade is through a small window. This is an excellent feature that can avoid any accidents or slips when cutting the piece. And in addition to the work light, it can improve your accuracy to a great extent.

  • Blade Speeds

This is a handy feature to have if you cut larger to different size pieces often. It is what it implies, a blade that has more than one working speed.

And because of it, by increasing the speed, you can speed up on cutting those large and thick pieces of wood. It is great for a more accurate cut as well. For a full day of continuous work, you might want to look for one that comes with up to 4 speeds.

Frequently Asked Questions

1. What is a bandsaw good for?

A bandsaw is mainly suitable for cutting or shaping irregularly shaped wood. Another common use is to rip or resaw lumber into thin pieces and also cutting larger sections of material.

2. Do I really need a bandsaw?

If you are a woodworker or deal with cutting lumber pieces often, then investing in a bandsaw is a great idea. It is especially the case if the pieces are thicker than 3 ½ inches since that is the standard biggest size you will find in a table saw.

3. What is the difference between a band saw and a table saw?

One of the major differences between the two is that a table saw is more dangerous to use than a band saw. It uses circular blades, which on kickback can cause some serious injuries, whereas the band saw's blade is mostly covered by the worktable.

You can also make curved shapes using a band saw, which is not possible to do with a table saw.

4. Are band saws dangerous?

Working with long sharp blades is always a dangerous activity. However, among such tools and machinery for crafting, the band saw is one of the safest out there. All you need to understand is how to operate it properly.

5. How thick can a bandsaw cut?

On average, a small band saw blade can cut through between 3 to 4 inches thick materials. And a bigger one can cut up to 6 inches thick materials smoothly.

Final Words

Whether you are a woodworker or a serious hobbyist, you need the best band saw for woodworking in your workshop. And with the help of our guide, we hope you found one from the list.

Scroll to Top